KEENER RUBBER BAND TOLERANCES

In an effort to eliminate variables and to provide a mutual understanding regarding

dimensional tolerances, the following summary is established.  In all cases you may 

be assured these tolerances are considerably more rigid than any which have been

established elsewhere.

	LENGTH				WIDTH				GAUGE
	outside dimension-flat		cut size			wall thickness

	3/4" TO 1 3/4"			1/32" TO 3/64"			.024" TO .031"
	   +/- 1/16" 			+/- 1/64"			+/- .005"

	1 3/4" TO 4"			1/16" TO 7/32"			.032" TO .046"
	   +/- 1/8"		        +/- 1/32"			+/- .005"

	4" TO 6"			1/4" TO 1/2"			.047" TO .063"
	   +/- 3/8"           		+/- 1/32"			+/- .015"

	6" TO 9 3/4"			5/8" TO 1 1/2"			.064" TO .093"
	  +/- 1/2"           		+/- 1/16"		    	+/- .020"

	9 3/4" TO 11 1/2		1 1/2" TO 2"			.094" TO .125"
	  +/- 5/8"           		+/- 3/32"			+/- .020"

DUE TO DISTORTION OF TUBE ENDS, APPROXIMATELY 10% OF BANDS MAY EXCEED LENGTH TOLERANCES

KEENER BANDS MEET OR EXCEED FEDERAL SPECIFICATION ZZ-R-1415/A-A-131

KEENER RESERVES THE RIGHT TO OVER/UNDER SHIP ON ANY SPECIALTY ORDER